Chongqing Chuke Intelligent Machinery & Equipment Co.,Ltd
Chongqing Chuke Intelligent Machinery & Equipment Co., Ltd. No problem for marking,Chuke focus on the marking machine for 14 years.
Add to Cart
Marking Logo Industrial Laser Marking Equipment For Stainless Steel Tube
Principle
Laser marking machine is a laser beam of electrons and metal material mutual chemical and physical reactions, the metal surface material off, the faster the laser speed, the faster the marking speed.
Appliance
Metal Marking Machine samples
Fiber laser marking machines use laser beams to mark the surface of various materials. Mobile phone accessories, wire, hardware, auto parts, digital, packaging, security, signs, watches and clocks, accessories, plastic, auto parts, as long as the metal and plastic materials can be marking, engraving, small laser cutting plotter, Product print patterns, text, logo, logo, two-dimensional code, bar code and so on.
Metal Fiber Laser Marking Machine parameter
| type | Metal marking machine |
| Size | 75*55*83cm |
| Gross Weight | 75kg |
| Laser power | 10/20/30/50 w |
| Laser wavelength | 1064nm |
| Power supply | 220V±10%/50Hz/4A |
| Repeating precision | ±0.002 |
| Repeating frequency | ±0.002 |
| Marking range | 110x110mm(customize) |
| Marking depth | 0.01~1mm |
| Marking speed | 7000mm/s |
| Minimum character | 0.15mm |
| Minimum line width | 0.01mm |
| Marking content | Graphics, text, bar codes, two-dimensional code, date, batch number, serial number |
Usage method
To make the best marking, you can make the following adjustments:
1, adjust the focal length by adjusting the head lifting device;
2. In the marking software to adjust the power, marking speed and other parameters;
3., into the software, double-click the print date, drag the mouse up and down, the print position adjusted to the appropriate location.
3, after completing the above steps can be printed test.
4, the test is correct, the workpiece can be re-marking.
Product features
1 Security: the use of laser marking technology carved out of the mark to a certain extent, has a strong anti-counterfeiting, can not easily imitate and change.
2 Persistence: Changes in the environment (touch, acidic and alkaline gases, high temperatures, low temperatures, etc.) do not subside the marking mark.
3 high precision laser engraving: marking laser marking machine clearly, lasting, beautiful, carved articles fine lines, line width can reach 0.04MM. And on very small pieces of plastic can print large amounts of data.
4: high processing efficiency: high processing efficiency, marking speed. Laser beam under computer control can move at high speed (speed of 5-7 m / s), the marking process can be completed in a few seconds.
5 Feasibility Contact: laser marking machine, can mark the printing of any regular or irregular appearance, and the workpiece will not produce internal stress after marking, to ensure the original accuracy of the workpiece. Does not corrode the working surface, there is no wear and tear , Poison and pollution.
Chongqing Purple Asahi Machinery Factory long-term metal laser marking machine production and sales and maintenance services, while providing print samples and engraving processing services, including laser marking machine products, laser engraving machine, laser cutting machine, laser Pen Maji, and so on.
FAQ
Laser marking machine can not achieve the expected marking depth reasons:
1, beam expander location, direction adjustment is accurate;
2, the lens surface with or without pollution;
3, the workpiece surface is in the focal plane;
4, the laser power output DC voltage 28V whether the decline, leading to laser output power decline.
Design feature
Fiber laser marking machine refers to the type of marking machine using a fiber laser, fiber laser with a small size (no water cooling device, the use of air-cooled), the light is good quality (base), maintenance-free features.
After service
After-sales service
Since the date of acceptance of the whole machine warranty II years, life-long maintenance. II years of non-human damage free repair. Two years later, only the cost of fees. After the equipment is sold, it must be strictly operated according to the instruction manual of the equipment. Solutions received within 2 hours after receiving the repair call, to be resolved within 24 hours (except legal holidays). Production plant in Chongqing, at any time after-sales service personnel to provide technical support.
Packing and shipping
1.product technology is responsible for the product packaging in the circulation process of the correct use of the supervision and confirmation. 2, the material responsible for the protection of the original packaging, storage and handling of storage and use of the correct method.
| Delviery time | 7-15 working days |
| Type of shipping | Express,air or sea |
| Terms of payment | T/T,credit card,,paypal |
| package size | 75x55x83cm |
| Gross weight | 75KG |
Chuke Factory
The company draws on the developed countries advanced electronics, laser, CNC technology, while taking full account of the actual needs of domestic enterprises; so over the years, "Zixu licensing" excellent price marking machine and improve after-sales service has been the majority of industrial users The praise. In fact, my company seldom participate in fairs or other advertising activities, mainly rely on the mutual introduction of customers to develop new business, in fact, about 80% of our customers are introduced through the purchase of old customers. Facts have proved that as long as we can maintain excellent product quality and good after-sales service, we will be able to guarantee a good market share.