4X110mm Wear Resistant Pneumatic Marking Machine Stylus Long life

Principle

The pneumatic pneumatic printing needle realizes the up and down movement of the printing needle by compressing the lower pressure of the compressed

Application

The pneumatic pneumatic printing needle realizes the up and down movement of the printing needle by compressing the lower pressure of the compressed air and the reaction force of the spring. With the use of the pneumatic marking machine, the perfect mark is produced under the compression of the air.

Usage method

The debugging of the printing needle: the correct installation and debugging of the print needle can make the typed font beautiful and the life of the printing needle can be improved.
A: adjust the distance: after printing the needle, the distance between the needle tip and the printed workpiece should be kept at a certain distance (the desktop should keep 30cm distance, and the handheld should keep 20cm distance).
B: connect the connection line between the computer, the controller, and the print head. Open the computer in the print program

Product features

Coating alloy needle core
On the basis of the imported alloy, the needle tip is coated and hardened, which increases the wear resistance, greatly prolongs the service life of the needle core, and saves the marking cost in the long run.
Even high hardness steel, such as hardened steel, can be perfect in marking.

FAQ

When the pneumatic marking machine is working normally, the walking track is normal, but the needle or the amplitude is not out, the cause analysis and the method of displacement are:
Reason:
(1) the increase in friction between the printing needle and the needle sleeve may be due to the blockage between the needle and the needle sleeve, such as the aluminum scraps and iron chips when printing, or the needle and needle sleeves are too dry.
(2) the compressed air out of the air compressor has oil, through the air road to the needle sleeve of the O ring.
Terms of settlement:
(1) without unloading the needle sleeve, with a needle rod ordinary sewing machine oil can be directly coated on the outside; or if not, it may be a set of internal needle dirt stuck, as long as the removal of the needle by gas blowing in ladle clean or clean. Generally, the possibility of the latter is very small, as long as it takes first steps.
(2) regularly released in oil-water separator, and rotating the needle sleeve, clean the oil on the O ring.
The air road is not through.

Function

The standard needle housing has the color of the aluminum shell of the present color , the color of the shell is white , the color is no other color is beautiful , but is very environment - friendly

After service

Training how to install the machine marking needle on the machine

Packing and shipping

Packaging material: carton case with foam inside.

Shipping: 3-5 workdays shipping from China by Air/Express(DHL,FedEx,UPS,EMS etc.)

Chuke Factory

Chongqing Chuke Intelligent Machinery &Equipment Co.,Ltd
, conveniently located at the foot of beautiful Mount Jinyun ,the famous scenic of Beibei ,Chongqing. Founded in 2006, we are specialized in the research and production of marking machine and its main spare parts. The production and consumption reaches 10 thousand pieces a year, this makes us being the largest supplier of marking pin set.Main product
Laser marking machine, laser cutting machine, laser welding machine, electric marking machine, pneumatic marking machine, pneumatic tapping machine, electric corrosion marking machine, manual embossing machine .
We are innovators. We are problem solvers. We are committed to designing and manufacturing the highest-quality marking systems Our experienced engineering team develops customized marking solutions meet a variety of marking needs.